Ritus is now an iPhone appDownload

Cleaning and Maintenance

Rancid oils and scale ruin even the best coffee. Learn how to clean grinders, machines and accessories.

Dirty Gear, Bad Coffee

Coffee contains oils that stick to surfaces and go rancid within days. That residue adds a bitter, stale taste to any drink, even with the best beans.

Water, when heated, leaves limescale deposits in kettles and machines. That reduces heating efficiency, shifts temperature and can damage expensive equipment.

A simple daily, weekly and monthly cleaning routine solves almost everything and extends the life of your gear.

01

Cleaning Routine

EquipmentDailyWeekly / Monthly
Drippers and carafesRinse with hot waterWash with mild detergent and rinse well
French pressTake apart the filter and rinseWash the screens with detergent
GrinderBrush off loose groundsClean the burrs with a brush or grinder tablets
Espresso machineFlush the group, clean the portafilter and steam wandBackflush with machine detergent and clean the shower screen
KettleEmpty leftover waterDescale if white spots appear
Cloth filterRinse with water only, no soapBoil in plain water
02

Espresso Machine

Flush the group

Before and after each shot, run water through the group for 2-3 seconds to clear residue.

Backflush

On machines with a three-way solenoid valve, use the blind basket with dedicated detergent to clean the circuit, usually once a week.

Steam wand

Purge and wipe with a damp cloth right after each use. Dried milk clogs the tip and contaminates drinks.

Gasket and shower screen

The group gasket hardens over time; replace it when the portafilter locks in loosely or leaks.

Descaling

Follow the manufacturer's manual: some machines should not be descaled with acid, as it can damage boilers.

The right water

Filtered water or properly mineralized water is the best way to prevent scale.

03

Cleaning the Grinder

  1. 01

    Empty and Unplug

    Remove the beans from the hopper and unplug the grinder.

    Tip: For hand grinders, just empty them.

  2. 02

    Open the Burrs

    Follow the manual to remove the upper burr.

    Tip: Note or photograph the setting before taking it apart.

  3. 03

    Brush

    Remove grounds and oils with a dry brush and a small vacuum.

    Tip: Avoid water on the burrs; if they get wet, dry them completely.

  4. 04

    Reassemble and Recalibrate

    Put it back together, return to the previous setting and discard the first grams ground.

    Tip: Grinder cleaning tablets help between full cleanings.

Smell your gear

If the portafilter, carafe or grinder smells rancid, cleaning is overdue. A simple test: wipe the inside with a white paper towel; if it comes out brown and oily, it's time to clean.

Glossary Terms

See full glossary →
Burr Grinder
A grinder that uses two abrasive surfaces to crush coffee uniformly, producing consistent particle sizes essential for good extraction.
Portafilter
The handle-mounted basket used in espresso machines to hold and lock ground coffee for extraction.
Pitcher (Milk Jug)
The stainless steel jug used to steam and texture milk for espresso-based drinks. Comes in different sizes (300–600 ml) for single or multiple drinks.

Sources and References

  1. Specialty Coffee Association: Water Quality Handbook
  2. Machine and grinder manufacturers' manuals (they always take precedence over general tips).