Koar
The Brazilian ceramic dripper, created in Pernambuco, designed for clean, sweet and full-bodied cups.
Brazilian Design
Koar is a 100% Brazilian brewing method, conceived in Pernambuco by advertiser Fernando Sá and mechanical engineer Filipe Santiago. The idea was to create a dripper designed to showcase the specialty coffees produced in Brazil.
It is made of glazed ceramic and has 16 inclined, wave-shaped internal ridges that keep the filter away from the walls and let water flow easily. The 16mm outlet at the base also helps control the flow.
The result is usually a clean cup with clear sweetness, good body and softer acidity. And it works with V60-style paper filters, which are easy to find.
Ratio
1:15 to 1:16 (15g of coffee to 225-250ml of water).
Temperature
92-95°C. Ceramic holds heat; preheat the dripper well.
Total Time
2:30 to 3:30 minutes.
Grind
Medium to medium-fine, similar to V60.
Step-by-Step Technique
- 01
Preheat the Dripper
Seat the paper filter and pour plenty of hot water to warm the ceramic and the vessel. Discard the water.
Tip: Cold ceramic steals heat from the extraction. This step matters.
- 02
Dose
Add 15g of freshly ground coffee and level the bed with a gentle tap.
Tip: Start with the grind you would use for V60 and adjust by time.
- 03
Bloom
Pour 40ml of water in a spiral and wait 30-40 seconds.
Tip: A gentle swirl helps wet all the grounds.
- 04
Main Pours
Pour up to 150ml in slow circles and, once the level drops, top up to 250ml.
Tip: The ridges make the flow fast; steady pours keep the time under control.
- 05
Drawdown
Let it drain completely. The bed should end flat.
Tip: If it finishes before 2:30, grind a little finer.
Basic Recipe
Timeline:
Recipe Variations
Extra Sweetness
Four smaller pulses to extend contact time.
Two Cups
A recipe to share.
Iced
Brewed directly over ice.
Equipment Needed
Koar
Glazed ceramic dripper with support base.
02 Paper Filter
V60-style cone filters work well.
Scale with Timer
To control dose, water and time.
Gooseneck Kettle
Helps keep a steady flow.
Troubleshooting
Drains too fast
Grind finer or split the water into more pulses.
Cool cup or lacking sweetness
Preheat the ceramic more and use 94-95°C water.
Bitterness
Grind coarser or lower the temperature.
Filter collapsing
Wet the filter well first and pour more centrally.
Let's learn more?