Ritus is now an iPhone appDownload

Espresso Deep Dive

Dialing in, puck prep, pressure and diagnostics: everything beyond the basic step by step.

Small Shot, Many Variables

Espresso is the most concentrated brewing method and the most sensitive. In 25-30 seconds, water at about 9 bar passes through a compacted puck of coffee. Any variation in grind, dose or distribution shows up in the cup.

Baristas describe a shot with three numbers: dose (grams of dry coffee), yield (grams of beverage) and time. Together they form the "recipe" and let you repeat and adjust precisely.

This page goes deeper than the Espresso page: how to dial in, how to prepare the puck and how to read a shot.

01

Recipe Styles

StyleRatioExampleResult
Ristretto1:1 to 1:1.518g → 22-27gDense, sweet, intense, less clarity
Normale (classic)1:218g → 36g in 25-30sBalance between body and clarity
Lungo / modern1:2.5 to 1:318g → 45-54gClearer, lighter body; good for light roasts
Turbo shot1:318g → 54g in ~15s, coarser grindLight and sweet, with less risk of channeling

Fast, coarse-ground shots gained traction after a 2020 study (Cameron et al.): lowering the dose from 20g to 15g and grinding much coarser gave the same extraction yield with far more consistency, in shots that can run under 15 seconds.

02

Dialing In

  1. 01

    Set Dose and Ratio

    Start with your basket's rated dose (usually 18g for a double basket) and a 1:2 ratio.

    Tip: Weigh the dry coffee and the beverage on a scale, not by cup volume.

  2. 02

    Use Grind to Hit the Time

    Too fast (< 22s) and sour: grind finer. Too slow (> 35s) and bitter: grind coarser.

    Tip: Discard the first shot after a grind change because of retention.

  3. 03

    Taste and Adjust the Ratio

    Once time is in range, adjust by taste: sour calls for more yield (1:2.2); bitter and dry, less (1:1.8).

    Tip: Light roasts often want longer ratios and higher temperatures.

  4. 04

    Temperature as a Fine Tune

    Most machines run between 90 and 96°C. Go up for light roasts, down for dark roasts.

    Tip: Change 1°C at a time.

03

Puck Prep

The goal is an even bed with no easy paths for the water.

WDT

Stirring the grounds in the basket with fine needles (Weiss Distribution Technique) breaks clumps and evens out density.

One of the cheapest and most effective upgrades.

Leveling

The grounds should be flat before tamping so the tamper doesn't create a tilted puck.

Light taps or a distributor tool.

Tamping

Press until the coffee stops compressing, keeping the tamper level. The exact force matters less than consistency and levelness.

Don't knock the portafilter after tamping.

Screens and Paper

Metal puck screens on top and paper filters at the bottom of the basket help distribute water and reduce channeling.

Optional, but popular.

04

Reading the Shot

A bottomless (naked) portafilter shows what happens under the basket.

Channeling

Thin jets, spurts or pale spots mean the water found easy paths. The cup turns bitter and sour at the same time.

Ideal flow

Drops appear across the basket, merge in the center and form a continuous stream, like honey.

Crema

It signals freshness (CO₂), not quality. Very fresh coffees have lots of crema; so do canephoras.

Blonding

The stream turns pale near the end; a good moment to stop if the shot is getting watery.

Pressure and profiles

Machines with pressure or flow control allow long pre-infusions and declining pressure, which soften light roasts.

Pre-infusion

Wetting the puck at low pressure before full extraction reduces channeling and is common on modern machines.

One variable at a time

Espresso is a system where everything affects everything. Change one thing at a time, write down dose, yield, time and taste, and use the Shot Tester in Tools to track your progress.

Glossary Terms

See full glossary →
Portafilter
The handle-mounted basket used in espresso machines to hold and lock ground coffee for extraction.
Tamping
Compressing the espresso puck with a tamper to create even resistance for water flow.
WDT (Weiss Distribution Technique)
Using a thin needle or wire tool to evenly distribute grounds in the portafilter basket before tamping, reducing channeling.
Channeling
When water finds a path of least resistance through the coffee bed in espresso, causing uneven extraction.
Pre-infusion
In espresso, a phase of low-pressure water that saturates the puck before full extraction pressure is applied. Reduces channeling and improves shot consistency.
Crema
The golden-brown foam on top of espresso, formed by CO₂ emulsified under pressure. Good crema indicates fresh coffee and proper extraction. "Crema de leite" refers to milk foam/microfoam.
Puck Screen
A metal screen placed on top of the espresso puck before extraction to distribute water evenly and improve flow.